HAM ThermoStatFC
The HAM ThermoStatFC is a thermostat for fan coil units. It controls the heating or cooling mode and the fan speed, with 3 outputs.
The serial number starts with e40:.
For installation and availability, contact us.
What it measures
Section titled “What it measures”| Reading | Unit | Note |
|---|---|---|
| Temperature | °C | Room temperature. |
| Humidity | % | Room relative humidity. |
| Thermostat Output | cool / heat / off | What the thermostat does now. |
Typical uses
Section titled “Typical uses”- Fan coils in hotels, offices and homes.
Installation
Section titled “Installation”You connect the device to WiFi from the mobile app. See Connect to WiFi.
Settings
Section titled “Settings”- Disable manual control: the buttons on the device do not change the settings. You control it only from the app.
Controls
Section titled “Controls”| Output | Values |
|---|---|
| Target | 10-35 °C |
| Mode | OFF, COOL, HEAT, AUTO |
| Fan | LOW, MID, HIGH |
Recommended rules
Section titled “Recommended rules”The Recommended setups button on the device page suggests:
- An alert when the temperature goes out of range.
- An alert when the humidity goes out of range.
- An alert when the device stops sending data.
See Your first alert.
Specifications
Section titled “Specifications”| Outputs | 3 |
| Connectivity | WiFi 2.4 GHz |