Skip to content

HAM BLE Water Leak Sensor

HAM BLE Water Leak Sensor

The HAM BLE Water Leak Sensor alerts you when it finds water on the floor. It works on a battery and sends its state over Bluetooth, with no wires.

The serial number starts with b5:.

The device has no internet connection of its own. It needs a HAM WiFi device with the BLE hub feature, or a GPS tracker, near it. That device hears the sensor and sends its state to the app. The Heard by reading shows which device heard the sensor last.

The shop sells the sensor alone or together with a hub device.

Reading Unit Note
Leak yes / no Yes when the sensor finds water.
Temperature °C
Battery %
Battery Voltage V
Heard by device The device that heard the sensor last.
Latitude, Longitude degrees From the device that heard the sensor.
Last move at time The last time the position changed.
  • Below water heaters, washing machines and sinks.
  • Boiler rooms and pump rooms.
  • Basements and storage rooms.

The device needs no WiFi setup. Claim it to your account with the Device key. See BLE devices. Put it on the floor, at the point where water collects first.

For installation details, contact us.

The sensor detects water with two points on its back side.

  • Show map: shows the sensor position on a map.
  • Include in summary views: the sensor shows in the summary views.
  • Device Description: text that shows as a subheading in reports.

There are no ready recommended rules for this device. A usual rule sends an alert when Leak becomes yes. See create a rule.

  • The app shows the device offline: make sure that
    • the HAM device that hears it is online,
    • the device is near that HAM device,
    • its battery is not low.
  • For general problems, see device offline.
Item Value
Connectivity Bluetooth LE
Power CR2032 battery, life about 2 years
Operating temperature -10 to 50 °C
Range Up to 100 m in open space
Water resistance Waterproof
Dimensions 50 x 50 x 18 mm
Weight 26 g
Chat with support