HAM ThermoSenseK
The HAM ThermoSenseK logs high temperatures with a type K thermocouple. It is for ovens, flues and other areas with a very high temperature.
The serial number starts with e42:.
What it measures
Section titled “What it measures”| Reading | Unit | Note |
|---|---|---|
| Temperature | °C | From the type K thermocouple. |
| General input | open / closed | For a magnetic contact, for example an oven door. Shows when you configure the input. |
| Input counter | count | Counts the changes of the input. Shows when it has counted something. |
Typical uses
Section titled “Typical uses”- Ovens in bakeries and restaurants.
- Flues and exhaust gases.
- Industrial processes with high temperatures.
Installation
Section titled “Installation”Put the device outside the hot area. Only the thermocouple goes into the hot area. You connect the device to WiFi from the mobile app. See Connect to WiFi.
For installation and availability, contact us.
Settings
Section titled “Settings”- Calibration table (in Advanced): field correction, up to 6 points. It is not a laboratory certificate.
- General input is alarm output: the general input becomes an alarm output. A rule with the action Alarm output turns it on.
Recommended rules
Section titled “Recommended rules”Make an alert for temperature out of range and an alert when the device stops sending data. See Your first alert and offline alerts.
Troubleshooting
Section titled “Troubleshooting”See wrong values and device offline.
Specifications
Section titled “Specifications”| Input | Type K thermocouple |
| General inputs | 1 |
| Connectivity | WiFi 2.4 GHz |