HAM LED Dimmer

The HAM LED Dimmer controls LED lighting from the app. It sets the color, the brightness and the lighting program.

The serial number starts with 17:. It is a device of the older generation.

What it measures

Reading	Unit	Note
General input	open / closed	Shows when you configure the input.
Input counter	count	Counts the changes of the input.

The app shows the general input as Gen. In. until you give it a name.

You connect the device to WiFi from the mobile app. See Connect to WiFi.

For wiring and availability, contact us. See Contact support.

Button Mode: what the device button does. The options are Disabled, Cycle Programs, Toggle output, Cycle Presets, Cycle Presets with off and Event. The default is Disabled.
Do not keep track of data: the platform keeps no history for the device.
Allow LAN commands: other devices on your local network can control this device. Keep the setting off if you do not need it.

General settings for all devices are in Device settings.

On the device page you find:

Program: buttons OFF, ON, A, B, C, D, F, H and R. OFF turns the lighting off.
When Program is ON, the page shows the channel sliders R, G, B, W and C, or the color control.
The color control has Hue, Saturation, Brightness and White.
With Save as favorite you keep the current color so that you can use it again.

In the Notifications and Automation section of the page you find:

The device does not connect to WiFi: make sure that the router transmits on 2.4 GHz with a 20 MHz channel. See WiFi setup fails.